- Waterproof: Impervious to water
- Water Repellent: Treated with a finish that is resistant but not impervious to penetration by water
How do electronics become waterproof?
The term waterproof is itself confusing as there are varying scales of 'waterproofness' that can be measured to determine how well electronics perform in and around water. This scale is known as the Ingress Protection Rating (IPX) and is based on a scale of 0-8 where 0 means it has no protection and 8 means it can handle continuous immersion in water. For example, an electronic device that has an IPX7 rating is protected against water submersion to a depth of 1m for no longer than 30mins. The level of water protection a device is capable of is usually highlighted by the manufacturer either on the device or in the manual.
For a smartphone to pass IPX6 and above, the devices physical appearance is normally compromized and this can be seen through the development of ruggedized handsets that feature protective rubber and plastic casings, as below:
|Sonim XP3 waterproof phone|
How are these new devices waterproof?
Well the answer is quite simple, gaskets and O-rings. Before water can reach the valuable internal components where all our data is stored there are barriers in place in the forms of gaskets and O-rings. For quick reference a gasket is a mechanical seal which fills the space between two or more surfaces to prevent leaking while an O-ring is designed to be compressed between two parts creating a seal. While both these barriers stop water from penetrating inside the device they can still alter physical aspects of the device making them bulky as well as expensive to produce and purchase.
There is also another problem, these seals can be comprised by general use and over time the parts can move or be damaged should the device be dropped. If just one of these barriers were to break, water would then be able seep inside towards the circuit board and internal components, resulting in device failure and loss of data as the inside becomes exposed to water.
Why repellency over waterproof?
Firstly, we need to be clear what repellent means when talking about electronics and how it differs from waterproof. That is where Aridion™ comes in.
The key difference is that electronics treated with Aridion™ will still allow water to get inside. Does that mean the end of the devices life? Not necessarily, as Aridion™ molecularly bonds to both the inside and outside of the entire device ensuring that each and every exposed surface is coated. This means that any water that does come into contact will move away from the surface rather than sticking to the device and if water does get inside, the internal components are also treated, producing the same effect.
This type of protection allows the device to be created without having to compensate for a protective casing, gaskets or O-rings. What is important to remember however is that even though the water is repelled, the coating does not make the device waterproof as it is not designed to withstand submersion.
You can get a better idea of how the coating is applied and works in this video:
Aridion™ provides water protection by removing the buildup of corrosion. Corrosion occurs not just when a phone is submerged but in high humidity and moisture environments such as saunas, in the bathroom when having a shower or traveling through different temperatures. All these factors can lead to internal moisture buildup which over time can corrode the circuits. Aridion™ protects against this as it stops the water/moisture from sticking to and in between the components which would result in electrochemical migration. Electrochemical migration is the movement of metal ions between conductors and if this happens the device short circuits.
So what is the difference?
In the simplest terms, for a device to be waterproof it has to either be completely sealed and ruggedized (making them bulky) or alternatively it must have barriers in place which stops water from penetrating through. The disadvantage with that being these seals can break resulting in the device becoming susceptible to water and corrosion damage.
Water repellent does not mean waterproof but it does mean protection from splashes, spills, corrosion and water damage brought on by the scenarios mentioned earlier (humidty and moisture) as well as those 'caught out in the rain' moments we have all experianced.
If you would like to know more about Aridion™ technology and the benefits it offers you can here.
The following video which was filmed at MWC with our CTO Dr. Stephen Coulson visibly demonstrates the benefits that Aridion™ offers to electronics devices:
Aridion™ is applied during the manufacturing process and is already applied to over 9 million devices including the Motorola RAZR and XOOM 2.